DIVUS GmbH
DIVUS GmbH is a South Tyrolean manufacturer of KNX touchpanels and building automation systems.
I started my KNX CONTROL device for the first time. What's next?
“To configure, connect remotely to the KNX CONTROL device. Open Google Chrome and go to the device's local IP address shown in the project, router or display. If a certificate warning appears, confirm it to go to the interface.”
在公司资料中查看My KNX CONTROL device does not communicate with the KNX system or only communicates in one direction. What do I need to check?
“First check the KNX bus connection: correct wiring, bus voltage, polarity and possible address conflicts. The standard physical address of the KNX CONTROL device is 0.0.255.”
在公司资料中查看How can a KNX CONTROL device be used as a programming interface in ETS?
“For local access, the device can act as a communication interface of type KNXnet/IP be set up in the ETS. To do this, enter the IP address of the KNX CONTROL device manually.”
在公司资料中查看Where can I find tools and software to download?
“All current tools, software packages, firmware files and technical documents are stored centrally in the Download area maintained. Use the filters based on area, product and document type.”
在公司资料中查看Where can I find manuals and further information about KNX CONTROL products?
“Manuals, quick starts, data sheets and further technical information can be found in KNX Control download area. This means that the documents remain up-to-date in one place and do not have to be maintained separately on each product or FAQ page.”
在公司资料中查看